SKU: GRP-0000217
This dual in-line solution heater/cooler extends the temperature range for controlled perfusion studies of both coverslip mounted cells and anchored tissue thin slices.
Customers from Europe and Australia can use the Multi Channel Systems - Online Shop to order Warner products or create quotes.
In-line solution heating has proven to be one of the most effective methods of maintaining the temperature of perfusion solutions. The SC-20 Dual In-line Solution Heater/Cooler utilizes Peltier thermoelectric technology to regulate temperature both above and below ambient levels.
The SC-20 is designed to thermally regulate either one or two solutions at the same temperature. Temperature regulation is provided by the CL-200A or CL-100 Bipolar Temperature controller.
Solution temperatures can be maintained at 0°C at flow rates of 2 ml/min., 5°C at 5 ml/min., or as high as 50°C at 5 ml/min.
An integral water jacket is used to remove excess heat from the SC-20 and the LCS-1 is specifically designed to provide this service.
The SC-20 can be used with either one or two discrete perfusate solutions, or with a solution/gas combination. When coupled with a PHC Series Imaging Chamber Heater/Cooler Jacket, the SC-20 provides an effective means of temperature control in the chamber, even under slow-flow conditions.
* Be advised that saturation limits for many ionic compounds are decreased at lower temperatures and that this is not a property of the SC-20 or other Warner apparatus.
Each heater/cooler is supplied with a TA-29 thermistor cable assembly for monitoring the bath temperature.
