406.768.5511
100 Industrial Park
Poplar, Montana 59255
This cable is built to drawing 6506168 in accordance with ....
This wiring harness is built to drawing A13015246 in accordance with...
This accessory kit consists of the following:
Each harness is built to its drawing in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3249745 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3249740 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3272592 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wire harness is built to drawing A3168046 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This cable assembly is built to drawing A3272613 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wire harness is build to drawing A3167779 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3167782 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3167773 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3168045 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wiring harness is built to drawing A3249744 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wire harness is built to drawing A3249743-1 in accordance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
This wire harness is built to drawing A3307491 in accodance with workmanship standards of IPC/WHMA-A-620 and soldered per IPC-610 and J-STD-001. Each harness is tested for continuity (<2.0 OHMS) and insulation resistance tested per MIL-STD-202, Method 302,Condition B at 500 VDC.
© 2026 West Electronics | Website by Zee Creative
