Thank you very much for your valuable suggestion! We will solve it as soon as possible!
Order has been saved to Cart. Failed to Add to Shopping Cart.
If you enter in units of inches and press the Convert button, it will be converted into units of millimeters in the quotation form.
Quote by Sales
PCB Assembly Quantity pcs Quantity is required. Please advise your target price for the PCBA (pcb+smt+bom), ALLPCB will try to make a better offer for you.
Panel Format Vertical X Horizontal. PCB Dimension PCB Panel Dimension Height X Width mm Dimension is required inch↔mm. PCB Panelization by ALLPCB.
Please Select your Option. We recommend "Yes" to save your cost and improve our SMT efficiency.
Recommended Panel Format Vertical X Horizontal. Estimated Panel Dimension 0*10mm Panel Info. ≥48pins QFN Quantity pcs E.g BGA/ QFP/ QFN. Depanel the PCBs before shipping.
You can fill in this section to get the accurate price immediately, or leave it blank to wait for final quote.
Standard
Advanced
Special Requirement Note
PCBA Application Field. BOM Parts Options.
Allow Substitutes.
we will send you the substitutes for approval before production.
Contains Sensitive Components.
Conformal Coating.
Additional Service.
PCBA Remark
Product Type:
Dimensions: Dimensions refer to the maximum horizontal and vertical distance with ±0.2mm default tolerance. Leave a note for special tolerance requirement. Please choose either Keep-out layer or Mechanical layer as outline. Note, dimensions are accurated to one decimal place, and dimensions in the uploaded file shall prevail.
X mm size of pc. Quantity: pcs.
Other: The qty must be over 200, qty for single pcb should be multiples of 50, qty for panel boards should be multiples of 10 !
Layers: Typically, 1 layer PCBs are manufactured with 2 layer PCBs in panel for efficiency. For the same processes as 2 layer PCBs, some 1 layer PCBs will have copper plated vias with better performance. If your PCBs are 1 layer with copper plated vias, please choose 2 layers.
Layers Order： Gerber file extension name. e.g. L1:GTL L2:G1 L3:G2 L4:GBL. Order Type:
X-out Allowance in Panel: When choosing "Not Accepted", the quantity of good boards will be certainly ensured, but the price will be higher.
Panel Way: X order:Vertical X Horizontal. Panelization Detail. Image for panelized board↓ (Scaling：/1) 0.00 mm 0.00 mm. Edge Rail:
Edge-Rail Width： mm Label_min4mm. Panel Separating Way： routing width in Y level： mm routing width in X level： mm. Panel Rule: Panel boards refer to different boards put in one folder or compression package. So $8.7 is charged for one panel, regardless of the panel methods by stamp hole, long slot or directly milling. Delivered As X Label_pcs. Edge Rail： mm.
Material Type: The FR-4 material is TG130 with 0.4-3.0mm thickness. The thermal conductivity of Aluminum board is 1.0/1.5/2.0W with 1.0-2.0mm thickness.CE-M-1 plate is only suitable for single panel and 1.6 plate thickness.Fr4 Kingboard plate only supports more than 5 square meters.
Label_FR4TG: The glass transition temperature for FR-4, TG130-170 is available.
Heat Conductivity:
Withstanding Voltage Value: The withstand voltage of aluminum board is 2500v by default, 3500v and 4000v are available when the heat conductivity is 1.0 w, the finished copper is 1oz and the thickness within 1.0mm to 2,0mm.
PCB Kinds: Differrent PCB kinds are merged in 1 design. This is not related to the panel separating way. Usually, 1 PCB order is for 1 kind PCB as default. If there are other kinds, extra costs will be charged. (Numbers of board types in documents).
Thickness: Thickness refers to the thickness of circuit board. We adopt Level A KB military materials with default 10% tolerance caused by solder mask and copper plating. Any special requirement for tolerance, please leave a note.
0.4mm board can't be separated by V-cut. Finished Copper (outer):
Inner Copper:
