Replacing a kitchen sink is a manageable DIY project that can refresh the look of your kitchen. This guide will walk you through the process step-by-step.
Locate the shut-off valves under the sink and turn them clockwise to stop the water flow. Open the faucet to drain any remaining water from the lines.
Place a bucket under the P-trap. Use a wrench to loosen the slip nuts and remove the P-trap and drain lines. Disconnect the water supply lines from the faucet.
If your sink is undermount, you will need to support it from below before loosening the clips. For drop-in sinks, cut through the sealant around the edge with a utility knife and lift the sink out of the countertop.
Apply a bead of plumber's putty or silicone caulk around the underside of the sink's rim (for drop-in) or to the countertop edge (for undermount), following the manufacturer's instructions.
Carefully lower the new sink into the cutout. For undermount sinks, secure it with the provided mounting clips from underneath. Wipe away any excess sealant.
Reattach the P-trap and drain assembly. Reconnect the water supply lines to the faucet. Ensure all connections are tight but do not over-tighten.
Turn the water supply back on. Slowly run water and check all connections for leaks. Tighten any fittings if necessary.
Take your time and follow all instructions provided with your new sink. A proper installation ensures longevity and performance.
