Specification:
Note:Cause rogers 5880 material is glass microfi ber reinforced PTFE,so it is easy contractively,so the min line and hole can’t be small,3mil line or 0.15mm hole,it’s difficult to attach.
Rogers 5880 is a PTFE (Polytetrafluoroethylene)-based composite material filled with ceramic particles. This unique composition provides exceptional electrical and mechanical stability, making it ideal for microwave and high-frequency PCB designs.
Unlike conventional PCB materials like FR-4, Rogers 5880 offers minimal dielectric loss, ensuring signal integrity even at extremely high frequencies. This property is particularly beneficial for designs that require low insertion loss and tight impedance control.
RT/duroid® 5870 and 5880 glass microfi ber reinforced PTFEcomposites are designed for exacting stripline and mi crostrip circuit applications.The randomly oriented microfi bers result in exceptional dielectric constant uniformity.The dielectric constant of RT/duroid 5870 and 5880 laminates is uniform from panel to panel and is constant over a wide frequency range.Its low dissipation factor extends the usefulness of RT/duroid 5870 and 5880 laminates to Ku-band and above.RT/duroid 5870 and 5880 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes. Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ ft.2 (8 to 70m) or reverse treated EDC on both sides, RT/duroid 5870 and 5880 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specifi ed.When ordering RT/duroid 5870 and 5880 laminates, it is important to specify dielectric thickness, tolerance, rolled,electrodeposited or reverse treated copper foil, and weight of copper foil required.
Ask: I have designed power divider in Rogers RT 5880 substrate Now I want to find the substrate for fabrication. Can you help me to quote for us and prototype? Dielectric constant =2.2 Substrate Thickness=0.787mm Conductor thickness =0.018mm
Answer: Yes,please kindly provide us gerber file and relevant requirements,we will ask our engineer check file carefully and quote you
Ask: RT5880 material is so expensive, it is exceed our budget, I wish to know whether i can use any other substrate in place of it and obtain similar results?
Answer: You can try Arlon Diclad880 or Taconic TLY-5 or Nelco NY9220, Check if they are available with the thickness you need. Price from high to low: rogers5880→taconic TLY-5→nelco NY9220→arlon Diclad880
Selecting a circuit material for a high-frequency printed-circuit board(pcb) is generally a trade-off,often between price and performance. However, PCB materials are also selected by two key factors: how well they meet the needs of an end-use application and what kind of efforts is required to fabricate a desired circuit with a particular material. These two factors may not mesh:one material may be well suited for a particular application but may pose challenges in terms of circuit fabrication,and vice verse.There is no foolproof,step by step procedure for selecting a PCB material.But by relying on some tangible guildelines designed to evaluate a material in terms of its suitability for circuit fabrication and for meeting the requirements of an application,the process of selecting a PCB for a particaular application can be simplied.
Low dielectric high-frequency multilayer rogers pcb ,improve the rogers 5880 pcb 's conductivity and the high quality make the customer save more costs .
High frequency PCBs with aluminum heat sink for telecommunication and aerospace industries using customer specific electrically and thermally conductive bonding films. Microwave PCB’s: Oneseine has enormous experience and technical expertise in the manufacturing of time critical, high technology RF circuits. The company works closely with its worldwide customers to deliver prototype-to-large volume manufacturing of circuits. During this process our engineering staff discusses with the customers’ staff to come up with the optimized designs for high quality, low cost and speedy delivery.
Tired of signal loss and thermal headaches holding back your high-frequency designs? Meet Rogers 5880 laminate – the engineered solution for demanding RF, microwave, and high-speed digital applications where ordinary FR-4 just can't cut it
Rogers 5880 isn't just another PCB material. It's a meticulously crafted high-frequency laminate designed to deliver unmatched stability and performance in critical environments:
Stop Compromising Performance. Choose Rogers 5880. Don't let material limitations bottleneck your innovation. Rogers 5880 provides the electrical stability, thermal management, and ultra-low loss foundation essential for pushing the boundaries of high-frequency technology.
Ready to experience the Rogers 5880 difference? Boost your signal integrity. Enhance system reliability. Achieve higher frequencies with confidence. Searching for a reliable partner for your next high-frequency PCB project? Look for Rogers 5880 expertise!
Engineers Trust Rogers 5880 Where Signal Integrity Can't Fail. When your RF, microwave, or high-speed digital designs demand uncompromising performance and bulletproof reliability, there’s one material that consistently delivers: Rogers 5880 laminates. Chosen by industry leaders for mission-critical applications, RO5880 isn’t just a material – it’s your competitive edge.
Don’t Risk Your Design with Inferior Materials. Compromising on your PCB laminate means compromising your product’s performance, reliability, and time-to-market. Rogers 5880 provides the proven foundation that advanced electronics demand.
Ready to Build with the Industry Standard? Specify Rogers 5880 on your next high-frequency PCB design and experience the confidence that comes with the world’s most trusted RF laminate.
