Flex PCBs are widely used in medical devices and wearables as they offer some great advantages. The demand for fitness wearables and medical devices is expected to increase even more in the upcoming years. Choosing an appropriate flex PCB manufacturing class is essential to ensure all the necessary requirements are met.
Before we talk about flex medical PCBs, let us have a look at the standard IPC classes.
The different manufacturing classes for PCBs were established by IPC, the trade association devoted to connecting electronics industries. The higher the quality standard, the higher the classification.
Class 1 PCBs are classified as general electronic products.
Class 2 flex PCBs are used in electronic products, such as cameras and smartphones.
Class 3 PCBs are used in high-reliability electronic parts. This category includes any item in which the devices require 100% reliability and accuracy at all times. For example, medical applications generally use class 3 flex PCBs.
To understand the difference between class 2 and class 3 standards, read our article IPC Class 2 VS Class 3: The Different Design Rules.
As a PCB manufacturer or designer, it is important to know the difference between class 2 and class 3. Most of the time, even if the end product only requires class 1, class 2 PCBs are produced to ensure better performance. Void standards are among the biggest differences between classes. In the further sections, we will have a look at the standards for copper plating voids and surface finish coating voids.
Plating copper through-holes or vias are necessary for multi-layer or double-sided PCBs. Class 3 PCBs cannot have any evidence of voids in copper plating holes. For class 2, a single void in any hole is acceptable as long as no more than 5 percent of holes have voids. No void is more than 5 percent of the hole length, and the void is less than 90 degrees of the circumference. Also read, what is conformal coating?
Copper plating standard for class 3 PCB
Copper plating standards for class 2 flex PCBs
To know more about flex PCB design, read our article 5 Must-Knows for Your First Flex PCB Design.
There are similar stipulations when it comes to the surface finish coating.
For more detailed discussion on IPC standards, read our blog IPC-2223 standards and design violations for rigid-flex boards
These relatively small distinctions determine not just the classification of circuit boards, but also their reliability and capabilities. It should also be noted that flex PCBs that are used in medical devices should be manufactured as per the IPC class 3 standards. To ensure that a given circuit design meets the right qualification, it’s imperative that designers choose the right manufacturing class with the help of a reputable manufacturer that can deliver reliable products. In this article, we have studied the manufacturing class of medical PCBs. Let us know in the comment section if there are any specific topics that you would like to read more about.
To learn more about flex design guidelines, watch our webinar Flex PCB Design Guidelines for Manufacturing.
